low capacitance tvs array 1 05088.r6 2/08 www.protekdevices.com smp6lc05-2p thru smp6lc24-2p applications ? t1/e1 ? customer premise equipment (cpe) ? telecommunication equipment: base stations, wan, routers, multiplexers ? wireless lans iec compatibility (en61000-4) ? 61000-4-2 (esd): air - 15kv, contact - 8kv ? 61000-4-4 (eft): 40a - 5/50ns ? 61000-4-5 (surge): 8/20s - 100a features ? 3,600 watts peak pulse power per line (tp=8/20s) ? 600 watts peak pulse power per line (tp=10/1000s) ? 100a (2/10s) per bellcore gr-1089 (intra-building) ? itku.20 i pp @ 100a (5/310s) ? bidirectional configuration ? high surge capability ? available in multiple voltages ? protects two (2) bidirectional lines ? low capacitance: < 30pf per line pair ? rohs compliant mechanical characteristics ? molded jedec so-16 package ? weight 0.15 grams (approximate) ? available in lead-free pure-tin plating(annealed) ? solder reflow temperature: pure-tin - sn, 100: 260-270c ? consult factory for leaded device availability ? flammability rating ul 94v-0 ? 16mm tape and reel per eia standard 481 ? marking: logo, part number, date code & pin one defined by dot on top of package 05088 pin configuration so-16
smp6lc05-2p thru smp6lc24-2p 2 05088.r6 2/08 www.protekdevices.com device characteristics peak pulse power (t p = 10/1000s) - see figure 1 symbol v alue -55 to 150 c watts 600 units p pp t l parameter operating temperature peak pulse power (t p = 8/20s) p pp 3600 watts maximum ratings @ 25c unless otherwise specified storage temperature t stg -55 to 150 c peak pulse current (t p = 8/20s) - see figure 1 i pp 100 amps electrical characteristics per line @ 25c unless otherwise specified part number (see note 1) rated stand-off voltage v wm volts minimum breakdown voltage @ 1ma v (br) volts maximum leakage current @ v wm i d a maximum clamping voltage (see fig. 2) @ i pp = 10a v c volts smp6lc05-2p smp6lc6.5-2p smp6lc08-2p smp6lc12-2p smp6lc15-2p smp6lc24-2p 5.0 6.5 8.0 12.0 15.0 24.0 6.0 7.2 8.5 13.3 16.7 26.7 300 300 25 2 2 2 9.6 12.4 13.6 19.9 24.4 38.9 15 15 15 15 15 15 typical capacitance @0v, 1mhz c pf note 1: do no surge from pins 15/16 to 1/2, 3/4 to 13/14, 11/12 to 5/6 and 7/8 to 9/10. piv typically greater than 100 volts for eac h rectifier diode.
3 05088.r6 2/08 www.protekdevices.com smp6lc05-2p thru smp6lc24-2p graphs
!"#
$ % & figure 3 power derating curve '( )*'+!#, #,''#( " -
-
" *. - .
/ 0 . 1
".
figure 2 pulse wave form 0.1 1 10 100 1,000 10,000 100,000 t d - pulse duration - s 600w 10/1000s waveform 0.1 1 10 100 p pp - peak pulse power - kw figure 1 peak pulse power vs pulse time
smp6lc05-2p thru smp6lc24-2p 4 05088.r6 2/08 www.protekdevices.com so-16 package outline & dimensions copyright ? prot ek devices 2007 specifications: protek reserves the right to change the electrical and or mechanical characteristics described herein without notice (except jedec). design changes: protek reserves the right to discontinue product lines without notice, and that the final judgement concerning selection and specifications is the buyer?s and that in furnishing engineering and technical assistance, protek assumes no responsibility with respect to the s election or specifications of such products. protek devices 2929 south fair lane, tempe, az 85282 tel: 602-431-8101 fax: 602-431-2288 e-mail: sales@protekdevices.com web site: www.protekdevices.com outline & dimensions: rev 1 - 11/01, 06007 tape & reel/bulk ordering nomenclature 1. surface mount product is taped and reeled in accordance with eia-481. 2. suffix-t7 = 7 inch reel - 1,000 pieces per 16mm tape, i.e. smp6lc05-2p-t7. 3. suffix-t13 = 13 inch reel - 2,500 pieces per 16mm tape, i.e. smp6lc05-2p-t13 . 4. suffix - lf = lead-free, pure-tin plating, i.e. smp6lc05-2p-lf-t7 . 5. no suffix = product shipped in tubes of 48 pcs per tube. a b c d f g j k p r 9.80 3.80 1.35 0.35 0.40 1.27 bsc 0.19 0.10 5.80 0.25 10.00 4.00 1.75 0.49 1.25 1.27 bsc 0.25 0.25 6.20 0.50 0.386 0.150 0.054 0.014 0.016 0.05 bsc 0.008 0.004 0.229 0.010 0.393 0.157 0.068 0.019 0.049 0.05 bsc 0.009 0.009 0.244 0.019 dim min max min max millimeters inches package dimensions notes 1. - t - = seating plane and datum surface. 2. dimensions ?a? and ?b? are datum. 3. dimensions ?a? and ?b? do not include mold protrusion. 4. maximum mold protrusion is 0.015? (0.380 mm) per side. 5. dimensioning and tolerances per ansi y14.5m, 1982. 6. dimensions are exclusive of mold flash and metal burrs. package outline so-16 mounting pad m -a- -b- p d g -t- k c j r x 45o f 0.010? (0.25 mm) m b m 8 pl 0.010? (0.25 mm) s b m 16 pl t a s 16 9 8 1 0o - 7o 0.050? typ 0.030? 0.005? 0.245? min 0.160? 0.005? 0.045? 0.005?
|
